Crash protectors

Fork, fairing and swingarm protectors made from Nylatron,

Nylatron is a trade name for extruded and cast nylons:
Extruded & cast nylon's main characteristics can be found here.

It has high mechanical strength, stiffness, hardness and toughness.
Good fatigue resistance high mechanical damping ability and good sliding properties .
Excellent wear resistance & good machinability.

DescriptionPrice per setCodePictures
Front bobbin set - SOLD AS A PAIR
Will fit:
GSXR 600 K2 K3
GSXR 1000 K2 K3 K4
HAYABUSA K3 K4
GSXR 600 K4
GSXR 750 K4
SV1000N K3 >K7
SV1000S K3 > K7

GSX 1400 K4 > K7

What you will get is two for the front bobbins 28mm deep. They are machined down on the inside so they fit snug into the axle recess to stop them moving, then you hold them together using the threaded bar provided and Nylock nuts.

Kindly crash tested for us by SV Forum member Camann: Click picture for more details.

16.00 + P&P

FB1

Fairing set - SOLD AS A PAIR

Fits:
SV1000S K3 > K7
SV650S K3 > K7

13.50 + P&P

CB1
Rear bobbin set - SOLD AS A PAIR

The two rear protectors are spaced out from the swing-arms bobbin mounting point using aluminium spacers. They are held in place using stainless allen bolts and washers.

Fits:
SV1000S K3 > K7
SV1000 K3 > K7
SV650S K3 > K7
SV650 K3 > K7
SV650S all pre K3
SV650
all pre K3

18.50 + P&P

RB1
 
Rear bobbin set with paddock stand fittings - SOLD AS A PAIR

The two protectors ones are spaced out from the swing-arms bobbin mounting point using machined spools suitable for use with most hook type paddock stands. They are held in place using stainless allen bolts and washers.

Fits:
SV1000S K3 > K7
SV1000 K3 > K7
SV650S K3 > K7
SV650 K3 > K7
SV650S all pre K3
SV650
all pre K3

21.00 + P&P

RB2