SV650/DL650 PAIR removal kit

Description Price Each Code Pictures
TOTAL PAIR REMOVAL KIT
The PAIR system feeds air into the exhaust to aid in the combustion of unused fuel. The system was designed to improve emissions, but it can cause a problem with race cans or many aftermarket cans.  You may experience popping through the exhaust and occasional backfiring through the air box. The elimination of the system will fix this problem, and also saves weight. One way is to plug where the valve draws air from in the air box and leave the rest of the system in place, but this kit will allow you to remove the full system and save about pound of useless weight. The 650 kit comes with the extra plate to remove the pump (see photo.) You will need to retain the 'O'-ring and the two screws from the PAIR pump to fit this plate.

Full fitting instructions are provided with the kit.

 

 


This is what you get in one full kit
pair1.jpg (24666 bytes)
The stuff you remove
pair4.jpg (10378 bytes)
Where the blanking plates fit
KIT A
Version to fit:
SV650S K3, K4, K5, K6
SV650 K3, K4, K5, K6
DL650 K3 

39.00 + P&P

PAIR Kit A  
Kit B
Version to fit:
SV650 K7, K8, K9, L0, L1, L2
DL650 K4, K5, K6, K7, K8, K9, L0, L1
39.00 + P&P

PAIR Kit B  
If you only need to add the blanking plate for the airbox to your previously purchased kit:

 


 
Type A
Version to fit:
SV650S K3, K4, K5, K6
SV650 K3, K4, K5, K6
DL650 K3 
11.00 + P&P

Type A Plate
Type B
Version to fit:
SV650 K7, K8, K9, L0, L1, L2
DL650 K4, K5, K6, K7, K8, K9, L0, L1
11.00 + P&P

Type B Plate

 

Description Price Each Code Pictures
Due to popular demand you can now buy the PAIR block off plates on their own. 14.65 + P&P
 
PP2 pair_plates.jpg (55422 bytes)